+1 619-550-1900
Products
 
Advanced Search
 
Networking
Guides for selecting the correct interface type.
Hard Drive Refurbishing Process
Billing & Payment
Shipping
Legal & Privacy
Condition & Warranty
Software Drivers
Returns & Exchanges

SCSI ID Jumper Block Settings

You will need to locate the SCSI ID pins on the device. They are normally identifed as A0, A1, A2, A3 or SCSI 0, SCSI 1, SCSI 2, SCSI 3. These indicate the SCSI Pin Pairs to use when setting the SCSI IDs. These pin pairs will need to be jumped vertically in order to set the ID desired. This will require up to four SCSI jumpers.

If you do not have SCSI ID jumpers, you can purchase them at the following page:
Mini Jumpers for Hard Drives, CD/DVD ROM drives and Motherboards

SCSI ID Pin Pairs Covered SCSI ID Pin Pairs Covered
0 None (Default) 8 7-8
1 1-2 9 1-2 and 7-8
2 3-4 10 3-4 and 7-8
3 1-2 and 3-4 11 1-2, 3-4, and 7-8
4 5-6 12 5-6 and 7-8
5 1-2 and 5-6 13 1-2, 5-6, and 7-8
6 3-4 and 5-6 14 3-4, 5-6, and 7-8
7 1-2, 3-4, and 5-6 15 1-2, 3-4, 5-6, and 7-8