Advanced Search
 
Storage
SCSI
SCSI Controllers
SCSI Hard Drives
SCSI Hard Drives 68-Pin
SCSI Hard Drives 80-Pin (Hot Swappable)
Shop by Brand - SCSI Hard Drives
Maxtor SCSI Hard Drives
Fujitsu SCSI Hard Drives
Hitachi / IBM SCSI Hard Drives
Dell SCSI Hard Drives
HP / Compaq SCSI Hard Drives
Sun SCSI Hard Drives
External SCSI Hard Drives
SCSI Hard Drives 50-Pin
SCSI Cables & Adapters
SCSI Tape Drives
SAS
SATA Hard Drives Internal & External & Accessories
SSD - Solid State Drives
DAS - Direct Attached Storage
NAS - Network Attached Storage
Fibre /Fiber Channel
IDE / ATA / PATA
Laptop Drives
Hard Disk Drive Trays / Caddies - SCSI, SAS, SATA / PATA / IDE
Cases & Enclosures & Storage Arrays
Laptop Caddies / Trays
Laptop / Notebook Caddies / Trays & Interposers
Screws & Bolts for Hard Disk Drive Trays / Caddies / Sleds / Brackets
DVR Upgrades
Drive Wizard
Cables & Adapters
Networking
Computers
Audio & Video
Monitors
Gadgets & Executive Toys

Seagate ST3300007LW SCSI Hard Drive

Item Number: SGT-ST3300007LW-FR-1Y
Manufacturer's Part Number: ST3300007LW
Contact us about ST3300007LWGet help regarding ST3300007LW
 

Seagate ST3300007LW Cheetah 10K.7 300GB 10K U320 68pin SCSI Hard Drive - Factory Recertified

 
ST3300007LW SCSI Hard Drive Photo

ST3300007LW SCSI Hard Drive Photo ST3300007LW SCSI Hard Drive Photo ST3300007LW SCSI Hard Drive Photo ST3300007LW SCSI Hard Drive Photo
Price: $275.00
Condition: Factory Refurbished - What does this mean?
Warranty: 1 Year - Manufacturer - What does this mean?
 
 

Capacity: 300GB
Spindle Speed: 10,000RPM
Interface Type: SCSI 68pin / HD68 Female
Disk Size: 3.5"x1.0" (LFF Hard Drive)
Sustained Throughput (MBps): 59 - 118
Average Seek Time (read/write ms): 4.7 / 5.3
Electrical Interface Speed: SCSI LVD U320 - 320MBps 16-bit
On-Board Cache: 8MB

 
 
Factory Refurbished - What does this mean?
 
1 Year - Manufacturer - What does this mean?
 
The Cheetah 10K.7 lowers cost of ownership with the industry's highest reliability, designed for full duty cycle applications; Seagate-exclusive Background Media Scan; enhanced Error Correction Code; and low power and cooling requirements. Capacities include 300, 146 and 73 Gbytes, with Ultra320 SCSI or 2 Gbit/sec Fibre Channel interfaces.
Features Benefits
 
Full Duty Cycle Reliability
 
The Cheetah 10K.7 is designed to have the highest reliability, even when in used in demanding applications around the clock, 365 days per year.
 
Background Media Scan
 
Background Media Scan, a Seagate-exclusive feature, scans the media during drive idle time to preserve system bandwidth while enabling incipient errors to be corrected before data is lost.
 
Enhanced Error Correction Code
 
Decreased bit error rate better maintains performance throughout the life of the drive and results in a lower probability of lost data.
 
Low Power and Cooling Requirements
 
Further reduces cost of ownership
 
Highest Reliablity Rating
 
Reliability has a significant influence on a disc drive's total cost of ownership. Cheetah 10K.7 has an 0.62 percent AFR, the best in the industry.
 
Fluid Dynamic Bearing Motor
 
No ball bearings means reduced acoustics and improved reliability.
 
 

Distinctions
  • Cheetah 10K.7 is designed and manufactured by the same teams that successfully delivered the past six award-winning generations of Cheetah.


Compatibility

 
                          SEAGATE TECHNOLOGY LLC
                              1-800-SEAGATE
                          http://www.seagate.com
                            (C)opyright 2005


ST-3300007LW Ultra320 SCSI Wide (Cheetah 10K.7, LVD)

  ÉÍÍÍÍÍÍÍÍÍÍÍ»
  º REAR VIEW º  (ST-3300007LW only)
  ÈÍÍÍÍÍÍÍÍÍÍͼ
        (TOP)                  J5 Auxiliary
          ___________________  ÚÄÄ  Ä1¿/ÍÍÍÍÍÍÍÍÍ\
        Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ
          \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/  À  ÄÄ 2ÙÀÄ5ÄGÄGÄ12Ù
       68 pin I/O CableÙ        ³³³³³³
       Connection Male          ³³³³³³   SCSI ID = 0 (none)
                                ³³³³³ÀÄÄ SCSI ID = 1
                   pin-11 +5v ÄÄÙ³³³ÀÄÄÄ SCSI ID = 2
                   pin-10 GND ÄÄÄÙ³ÀÄÄÄÄ SCSI ID = 4
                                  ÃÄÄÄÄÄ SCSI ID = 8
      pins 9 & 12 no connection   ÀÄÄÄÄÄÄ or pin-8 Activity LED*

* These pins are driven low for 250ms after PWR ON and RESET
  to allow jumper selectable SCSI ID as shown above.


  ÉÍÍÍÍÍÍÍÍÍÍÍ»
  º REAR VIEW º  (ST-3300007LC only)
  ÈÍÍÍÍÍÍÍÍÍÍͼ
                     80 pin I/O and DC Power Wall/bracket Connection
                     ³  Female
    J1          /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\      TOP (HDA)
     ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ
              (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/)    BOTTOM

     Notes on 80 pin I/O connector:
       pins  1 -  4 = +12v        41 - 44 = 12v GND
            34 - 36 = +5v         74 - 76 = 5v GND
                 37 = SYNC             77 = LEDC
                 38 = MTRON            78 = DLYDST
                 39 = SCSIA0           79 = SCSIA1
                 40 = SCSIA2           80 = SCSIA3

  Mating connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin
                                   2-557101-1 right angle to PCB

  ÉÍÍÍÍÍÍÍÍÍÍÍ»
  º SIDE VIEW º  (ST-3300007LW only)
  ÈÍÍÍÍÍÍÍÍÍÍͼ

             FRONT    TOP (HDA)    J2  87654321              Õ͸
              OF ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍ͵J1
             DRIVE    BOTTOM           ::::::::              Ô;
                                       ³³³³³³³³
 Force Single-ended (LVD models only) ÄÙ³³³³³³À Term Power (LW only)¿
           Start Delay (12 secs * ID) ÄÄÙ³³³³ÀÄ Reserved            ³
                          Motor Start ÄÄÄÙ³³ÀÄÄ Reserved            ³
                        Write Protect ÄÄÄÄÙÀÄÄÄ Parity Disable      ³
                                                                    ³
                                                                    ³
                    ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿              ³
                    ³ Termination Power-source Table ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
                    ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄ¿
                    ³               ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³
                    ³                            2 1       ³
                    ³ A Drive Supplies Bus        ÖÄ·      ³
                    ³                            øºøº      ³
                    ³  (not used on LC model)    øÓø½      ³
                    ³                             A        ³
                    ÀÄÄÄÄÄÄÄÄÄDefault no jumper ÄÄÄÄÄÄÄÄÄÄÄÙ

     Note: LW and LC drives do not have internal terminators or
           any other way of adding internal terminators to the
           drive; use external active termination if required.
           Use active (ANSI SCSI-2 Alternative 2) terminators
           when terminating the bus.  Use active negation
           terminators when terminating a SCSI Ultra2 bus
           operating in Low Voltage Differential (LVD) mode.

  ÉÍÍÍÍÍÍÍÍÍÍÍÍ»
  º FRONT VIEW º  (ST-3300007LW/LC)
  ÈÍÍÍÍÍÍÍÍÍÍÍͼ
                                  ÚÄÄ´Reserved. Shipped with cover installed.
                                  ³  ÀDo not remove. Do not install jumpers
                      TOP (HDA)  ÕØÍÍ͸     1
     ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ
                 *    BOTTOM     ÔÍÍÍ;123456
                 ³               J6    ³³³³³³
            LED ÄÙ                     ³³³³³³
                            Remote LED Ù³³³³À ID 1
                           (pin-11 +5v) ³³³ÀÄ ID 2
                              Reserved ÄÙ³ÀÄÄ ID 4
                           (pin-10 GND)  ÀÄÄÄ ID 8



                            ST-3300007LW
                            Cheetah 10K.7



       UNFORMATTED CAPACITY (GB) ________________
       FORMATTED CAPACITY (GB) __________________300
       AVERAGE SECTORS PER TRACK ________________806 rounded down
       ACTUATOR TYPE ____________________________ROTARY VOICE COIL
       TRACKS ___________________________________726,192
       CYLINDERS ________________________________90,774 user
       HEADS ______PHYSICAL______________________8
       DISCS (2.5 in) ___________________________4
       MEDIA TYPE _______________________________THIN FILM/GMR
       RECORDING METHOD _________________________PRML
       INTERNAL TRANSFER RATE (mbits/sec)________470 to 944
       INTERNAL FORMATTED TRANSFER RATE (MB/sec)_59 to 118
       EXTERNAL TRANSFER RATE (mbyte/sec) _______40 Sync
            Low Voltage Differential(LVD) _______80/320 Sync
       SPINDLE SPEED (RPM) ______________________10,008
       AVERAGE LATENCY (mSEC) ___________________3.00
       BUFFER ___________________________________8MB
         Read Look-Ahead, Adaptive,
         Multi-Segmented Cache
       INTERFACE ________________________________Ultra-SCSI Wide
              Low Voltage Differential __________Ultra3-SCSI Wide
              ASA II, SCAM level 2 (1 default)
       BYTES PER TRACK __________________________556K avg
       SECTORS PER DRIVE ________________________585,937,500
       TPI (TRACKS PER INCH) ____________________105,000
       BPI (PEAK KBITS PER INCH) ________________658
       AVERAGE ACCESS (ms read/write)____________4.7/5.3
         Drive level without controller overhead
       SINGLE TRACK SEEK (ms read/write) ________0.2/0.5
       MAX FULL SEEK (ms read/write) ____________9.5/10.3
       ANNUALIZED FAILURE RATE (AFR) ____________0.62%
       SHOCK (G's, 11/2/.5 ms):
                operating (Read/Write) __________15/60/
                abnormal ________________________40//
                nonoperating ____________________75/225/120
       ACOUSTICS (Bels typical, sound power) ____3.3
       POWER DISSIPATION (watts/BTUs) Active ____/
                                      Idle ______10.14/34.60
       POWER REQUIREMENTS: +12V START-UP (amps) _1.91
                           +12V TYPICAL (amps) __0.62 idle
                           +5V START-UP (amps) __0.77
                           +5V TYPICAL (amps) ___0.54 idle
                           IDLE (watts) _________

       Physical:
                        Height (inches/mm):      1.0/25.4
                        Width  (inches/mm):     4.00/101.6
                        Depth  (inches/mm):     5.75/146
                        Weight    (lbs/kg):      1.6/0.726


ZBR = Zone Bit Recording = Variable sectors per track


Seagate reserves the right to change, without notice, product 
offerings or specifications. (04/14/2005)




Click here to view the manufacturers item description/brochure
 

These drives will work with any of our SCSI controllers:


Adaptec 29160 LVD SCSI Controllers

Used Pull - $99.00
 

Dell 8540V PERC 2SC 2/SC Single Channel LVD SCSI RAID Controller

Used Pull - $129.95
 
 

Dell 9M912 PERC 3DC 3/DC SCSI RAID Controller

Used Pull - $299.95
 

Dell PERC 2/DC Dual Channel LVD SCSI RAID Controller, BBU, 64MB Cache

Used Pull - $229.95
 
 

Adaptec 29160 LVD SCSI Controller

Brand New - $199.95
 

Adaptec 39160 LVD SCSI Controller

Used Pull - $129.95