+1 619-550-1900
Products
 
Advanced Search
 
Storage
Server & Array Hard Drive Wizard
SSD - Solid State Drives
SAS
SATA Hard Drives Internal & External & Accessories
SCSI
SCSI Controllers
SCSI Hard Drives
SCSI Hard Drives 68-Pin
36GB 80-pin SCA-2 SCSI Hard Drives
73GB 80-pin SCA-2 SCSI Hard Drives
146GB / 147GB 80-pin SCA-2 SCSI Hard Drives
9GB - 18GB 80-pin SCA-2 SCSI Hard Drives
300GB 80-pin SCA-2 SCSI Hard Drives
<9GB 80-pin SCA-2 SCSI Hard Drives
Shop by Brand - SCSI Hard Drives
External SCSI Hard Drives
SCSI Hard Drives 50-Pin
SCSI Cables & Adapters
SCSI Tape Drives
DAS - Direct Attached Storage
NAS - Network Attached Storage
Fibre /Fiber Channel
IDE / ATA / PATA
Hard Disk Drive Trays / Caddies - SCSI, SAS, SATA / PATA / IDE
Cases & Enclosures & Storage Arrays
Laptop / Notebook Caddies / Trays & Interposers
Screws & Bolts for Hard Disk Drive Trays / Caddies / Sleds / Brackets
DVR Upgrades
Cables & Adapters
Networking
Computers
Audio & Video
Monitors
Gadgets & Executive Toys

Hewlett Packard D9421A SCSI Hard Drive

Item Number: HPI-D9421A-RF-OE
Manufacturer's Part Number: D9421A
Contact us about D9421AGet help regarding D9421A
 

Hewlett Packard 18GB 15K U160 80pin SCA-2 SCSI Hard Drive D9421A with Tray - Refurbished

 
D9421A SCSI Hard Drive Photo

D9421A SCSI Hard Drive Photo D9421A SCSI Hard Drive Photo D9421A SCSI Hard Drive Photo D9421A SCSI Hard Drive Photo
Price: $129.95
Condition: Refurbished - What does this mean?
Warranty: 1 Year - Reseller - What does this mean?
 
 

Capacity: 18GB
Spindle Speed: 15,000RPM
Interface Type: SCSI 80pin SCA-2 (Hot-Swap)
Disk Size: 3.5"x1.0" (LFF Hard Drive)
Sustained Throughput (MBps): 37.4 to 48.9
Average Seek Time (read/write ms): 3.9
Electrical Interface Speed: SCSI LVD U160 - 160MBps 16-bit
On-Board Cache: 4MB

 
 
Refurbished - What does this mean?
 
1 Year - Reseller - What does this mean?
 

Hewlett Packard 18GB 15K U160 80pin SCA-2 SCSI Hard Drive D9421A with Tray - Refurbished


Compatibility

This drive and tray are fully compatible with Netserver models: LC2000r, LPr, LH3/r, LH3000/r, LH4/r, LH6000/r, LT6000r, LXr8000/8500 and RS/12.
 
  ÈÍÍÍÍÍÍÍÍÍÍͼ
        (TOP)                  J5 Auxiliary
          ___________________  ÚÄÄ  Ä1¿/ÍÍÍÍÍÍÍÍÍ\
        Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ
          \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/  À  ÄÄ 2ÙÀÄ5ÄGÄGÄ12Ù
       68 pin I/O CableÙ        ³³³³³³
       Connection Male          ³³³³³³   SCSI ID = 0 (none)
                                ³³³³³ÀÄÄ SCSI ID = 1
                   pin-11 +5v ÄÄÙ³³³ÀÄÄÄ SCSI ID = 2
                   pin-10 GND ÄÄÄÙ³ÀÄÄÄÄ SCSI ID = 4
                                  ÃÄÄÄÄÄ SCSI ID = 8
      pins 9 & 12 no connection   ÀÄÄÄÄÄÄ or pin-8 Activity LED*

* These pins are driven low for 250ms after PWR ON and RESET
  to allow jumper selectable SCSI ID as shown above.


                      80 pin I/O and DC Power Wall/bracket Connection
                     ³  Female
    J1          /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\      TOP (HDA)
     ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ
              (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/)    BOTTOM

     Notes on 80 pin I/O connector:
       pins  1 -  4 = +12v        41 - 44 = 12v GND
            34 - 36 = +5v         74 - 76 = 5v GND
                 37 = SYNC             77 = LEDC
                 38 = MTRON            78 = DLYDST
                 39 = SCSIA0           79 = SCSIA1
                 40 = SCSIA2           80 = SCSIA3

  Mating connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin
                                   2-557101-1 right angle to PCB

 
             FRONT    TOP (HDA)    J2  87654321              Õ͸
              OF ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍ͵J1
             DRIVE    BOTTOM           ::::::::              Ô;
                                       ³³³³³³³³
 Force Single-ended (LVD models only) ÄÙ³³³³³³À Term Power (LW only)¿
           Start Delay (12 secs * ID) ÄÄÙ³³³³ÀÄ Reserved            ³
                          Motor Start ÄÄÄÙ³³ÀÄÄ Reserved            ³
                        Write Protect ÄÄÄÄÙÀÄÄÄ Parity Disable      ³
                                                                    ³
                                                                    ³
                    ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿              ³
                    ³ Termination Power-source Table ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
                    ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄ¿
                    ³               ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³
                    ³                            2 1       ³
                    ³ A Drive Supplies Bus        ÖÄ·      ³
                    ³                            øºøº      ³
                    ³  (not used on LC model)    øÓø½      ³
                    ³                             A        ³
                    ÀÄÄÄÄÄÄÄÄÄDefault no jumper ÄÄÄÄÄÄÄÄÄÄÄÙ

     Note: LW and LC drives do not have internal terminators or
           any other way of adding internal terminators to the
           drive; use external active termination if required.
           Use active (ANSI SCSI-2 Alternative 2) terminators
           when terminating the bus.  Use active negation
           terminators when terminating a SCSI Ultra2 bus
           operating in Low Voltage Differential (LVD) mode.

                                   ÚÄÄ´Reserved. Shipped with cover installed.
                                  ³  ÀDo not remove. Do not install jumpers
                      TOP (HDA)  ÕØÍÍ͸     1
     ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ
                 *    BOTTOM     ÔÍÍÍ;123456
                 ³               J6    ³³³³³³
            LED ÄÙ                     ³³³³³³
                            Remote LED Ù³³³³À ID 1
                           (pin-11 +5v) ³³³ÀÄ ID 2
                              Reserved ÄÙ³ÀÄÄ ID 4
                           (pin-10 GND)  ÀÄÄÄ ID 8


                            ST-318451LW


       UNFORMATTED CAPACITY (GB) ________________23.86
       FORMATTED CAPACITY (GB) __________________18.351
       AVERAGE SECTORS PER TRACK ________________345 rounded down
       ACTUATOR TYPE ____________________________ROTARY VOICE COIL
       TRACKS ___________________________________103,770
       CYLINDERS ________________________________10,377 user
       HEADS ______PHYSICAL______________________10
       DISCS (3.3 in) ___________________________5
       MEDIA TYPE _______________________________THIN FILM/GMR
       RECORDING METHOD _________________________PRML 16/17 EPR4
       INTERNAL TRANSFER RATE (mbits/sec)________385 to 512
       INTERNAL FORMATTED TRANSFER RATE (MB/sec)_37.4 to 48.9
       EXTERNAL TRANSFER RATE (mbyte/sec) _______40 Sync
            Low Voltage Differential(LVD) _______80/160 Sync
       SPINDLE SPEED (RPM) ______________________15k
       AVERAGE LATENCY (mSEC) ___________________2.00
       BUFFER (/option LWV and LCV) _____________4MB/16MB
         Read Look-Ahead, Adaptive,
         Multi-Segmented Cache
       INTERFACE ________________________________Ultra SCSI Wide
              Low Voltage Differential __________Ultra3-SCSI Wide
              ASA II, SCAM level 2 (1 default)
       BYTES PER TRACK __________________________ avg
       SECTORS PER DRIVE ________________________35,843,670
       TPI (TRACKS PER INCH) ____________________21,400
       BPI (PEAK KBITS PER INCH) ________________343
       AVERAGE ACCESS (ms read/write)____________3.9/4.5
         Drive level without controller overhead
       SINGLE TRACK SEEK (ms read/write) ________0.5/0.7
       MAX FULL SEEK (ms read/write) ____________7.5/8.0
       MTBF (power-on hours) ____________________1,200,000
       SHOCK (G's, 11/2/.5 ms):
                operating (Read/Write) __________15
                abnormal ________________________40
                nonoperating ____________________75/250/125
       ACOUSTICS (Bels typical) ________Idle ____4.0
                                         Max ____
       POWER DISSIPATION (watts/BTUs) Active ____/
                                      Idle ______10.7/36.6
       POWER REQUIREMENTS: +12V START-UP (amps) _1.42
                           +12V TYPICAL (amps) __0.61 idle
                           +5V START-UP (amps) __0.73
                           +5V TYPICAL (amps) ___0.68 idle
                           IDLE (watts) _________
       IBM AT DRIVE TYPE ________________________0 or NONE

       Physical:
                        Height (inches/mm):     1.00/25.4
                        Width  (inches/mm):     4.00/101.6
                        Depth  (inches/mm):     5.75/146.05
                        Weight    (lbs/kg):      1.6/0.726

Already low-level formatted at the factory with x spare sectors at
the end of each x cylinder region.  

ZBR = Zone Bit Recording = Variable sectors per track



Click here to view the manufacturers item description/brochure
 

Please see our related items:


HP / Compaq 3rd Party Compatible 286714-B22 SCSI Hard Drive Kit

Brand New - $159.00
 

HP 0950-4465 SCSI Hard Drive

New Open Box - $109.00
 
 

HP 0950-4128 SCSI Hard Drive

New Open Box - $119.00